|
Building & Platform Compatibility
|
|
|
PLCIO version 4.4 includes support for the following PLC types: |
- AEG Modicon Quantum PLC via Ethernet
- Allen-Bradley Logix 5000 family (ControlLogix, CompactLogix, FlexLogix, SoftLogix) via EtherNet/IP
- Allen-Bradley MicroLogix via EtherNet/IP
- Allen-Bradley PLC-5 via DF1 serial, Ethernet, or EtherNet/IP
- Allen-Bradley SLC 500 series via DF1 serial, Ethernet, or EtherNet/IP
- Siemens Step5 via AS511 serial protocol
- Siemens Step5 via INAT Echolink over Ethernet
- Siemens Step7 200, 300, and 400-series CPUs via Ethernet
- Wago 750-842 PLC via Ethernet with optional unsolicited UDP support
|
PLCIO version 4.4 can communicate directly to the following I/O Bus Terminals: |
- Beckhoff BK9105 over EtherNet/IP
- Phoenix Contact FL IL 24 BK ETH/IP-PAC over EtherNet/IP
|
|
|
|
PLCIO was designed to compile and operate on any 32- or 64-bit UNIX or Windows platform. PLCIO was specifically tested on the following systems (other systems might work but may require slight changes to the source code): |
|
System | Requirements |
GNU/Linux | GLIBC 2.0 or later, Linux kernel 2.2 or later |
HP-UX 11 | gcc 2.95 or later |
Windows XP & 7 | MSYS/MinGW build environment |
|
|
|