Building & Platform Compatibility
Supported Equipment
PLCIO version 4.4 includes support for the following PLC types:
PLCIO version 4.4 can communicate directly to the following I/O Bus Terminals:
Supported Operating Systems
PLCIO was designed to compile and operate on any 32- or 64-bit UNIX or Windows platform. PLCIO was specifically tested on the following systems (other systems might work but may require slight changes to the source code):
PLCIO version 4.4 includes support for the following PLC types:
- AEG Modicon Quantum PLC via Ethernet
- Allen-Bradley Logix 5000 family (ControlLogix, CompactLogix, FlexLogix, SoftLogix) via EtherNet/IP
- Allen-Bradley MicroLogix via EtherNet/IP
- Allen-Bradley PLC-5 via DF1 serial, Ethernet, or EtherNet/IP
- Allen-Bradley SLC 500 series via DF1 serial, Ethernet, or EtherNet/IP
- Siemens Step5 via AS511 serial protocol
- Siemens Step5 via INAT Echolink over Ethernet
- Siemens Step7 200, 300, and 400-series CPUs via Ethernet
- Wago 750-842 PLC via Ethernet with optional unsolicited UDP support
PLCIO version 4.4 can communicate directly to the following I/O Bus Terminals:
- Beckhoff BK9105 over EtherNet/IP
- Phoenix Contact FL IL 24 BK ETH/IP-PAC over EtherNet/IP
Supported Operating Systems
PLCIO was designed to compile and operate on any 32- or 64-bit UNIX or Windows platform. PLCIO was specifically tested on the following systems (other systems might work but may require slight changes to the source code):
| System | Requirements |
| GNU/Linux | GLIBC 2.0 or later, Linux kernel 2.2 or later |
| HP-UX 11 | gcc 2.95 or later |
| Windows | MSYS/MinGW build environment |
CTI, A DIVISION OF THE POLING GROUP
Founded in 1978, CTI has been a valuable resource for large industries. Since 2001, we've expanded the capabilities of Poling Group tire equipment, including uniformity and geometry testing machines.
©2024 The CTI Division of the Poling Group